Payment & Shipping Terms:
|Material:||SS304 / 316||Capacity:||500L|
|Heating Method:||Electric||Cleaning System:||CIP And Spray Ball|
|Surface Finish:||Mirror Polish Or Matt Polish|
500L 304 Stainless Stain Hot Liquor Tank With Thermowell Ball Valve And Tri-Clamps For Beer Production
Brewhouse are custom-built to fit each brewer’s individual needs. Our staff works with you on everything from defining your optimal brewery layout, to designing the setup and size of your brewhouse and beer equipment hot liquor tank. Custom-piping? No Problem. Low ceiling or cramped quarters, there’s a design solution for that. Most importantly, every brewhouse is built with 304 Stainless Steel and uses ABB motors, so they are as durable and hard-working as you are. Further, every 20hl brewhouse goes through a comprehensive quality control inspection before it leaves our factory, where everything, including the inside of the piping, is inspected.
We can supply different size of beer brewery equipments,Such as 50l/batch, 100L/batch, 200L/batch, 500L/batch, 1000l /batch, 2000L/batch, 3000L/batch, 5000L/batch; 1-2bbl, 3bbl, 5bbl, 7bbl, 10bbl, 15bbl, 20bbl, etc;
1. Motors and pumps equipped in brewhouse and pipeline, their brand are 20hl brewery equipment hot liquor tank famous brand.
2. Round stainless steel manhole with sight glass, it is equpped in the top of brewhouse.
3. False plate is made on a complete stainless steel by CNC lathe, it is strong, filter fast and leak no any grist., and used in lauter tank.
4. First class sanitary sight glass, equipped in the pipeline of brewhouse.
5. plate heat exchanger, Suspension type, easy to disassembled and wash.
6. Pressure relief value with glass, clean and sanitation, It will have some pressure changes with the time went by, and it is easy to observe the wort status.
7. Rotating racking arm, used in fermentation tnak, and port on the cone with butterfly value, and it can get the beer from different place in the fermentation tanks.
Hot Liquor Tank with Thermowell, ball valve , Tri-Clamps and Gaskets. 1.5" Tri-Clamp HERMS Fittings
8. The above dimension is only for reference, we can make up to 30000L ,
and we can make special dimension according to client specific requirement
9. Mixer type: stirrer,high shear homogenizer,scrap mixer( can be made according to your products specific requirement)
10. Motor can be produced according to your factory electricity 110v/220v/240v/380v/415v/460v (50/60hz)Single phase or 3Phases
11. Tank material: sus304. Ss316 5. Tank structure: inside shell, jacket shell, PU insulation wall, outside shell.Used to heat and store water for use in the brewing process;
|Fermentation time||8-12 days||8-12 days||8-12 days||8-12 days||8-12 days|
side or top manway
sight gauge glass with guard and calibration (volume) strip
sight gauge glass fittings with sample valve on bottom fitting
CIP sprayball and downtube
heat exchanger water recovery inlet
hot liquor outlet w/ stainless steel butterfly valve
water inlet fitting
over-flow tube routed under tank
thermowell with strain relief
coned top and bottom
stainless steel legs w/ height adjusters & pads
2" PU foam insulation
clad in stainless steel;
Method of Heating:
Electric: use electric heater to heat the medium in the jacket to let tanks heated at bottom;
Steam: steam heat transfer panels (one on side, one on bottom) with inlet/outlet fittings;
Gas: forced draft gas burner with low water level cut-out and optional burner modulation;
Contact Person: Cindy Chen
Tel: 0086-137 9040 7437