Payment & Shipping Terms:
|Material:||Stainless Steel Sase||Pressure:||4.5, 21.7 Or 29psi|
|Surface Treatment:||Mirror Polish, Semi Bright||Size:||1.5"-2.5"|
|Power:||Automatic||Application:||General, Food, Beer, Beverage|
grain mill homebrew,
2.0" 100% Sanitary SS304 / 316L Pressure Relief Valve Brewing Accessories At 14.5, 21.7 or 29psi
Pressure relief valves, as the name suggests, relieve interior tank pressure when it rises above the 14.7 PSI (1 atmosphere). Our tanks are warrantied as a low pressure system. A pressure vacuum valve prevents the interior pressure from going below -1.5 PSI and thus potentially imploding the tank. Situations where this may occur is during a quick cool down, such as after a cleaning process, or when draining quickly. For protection of tanks against over-pressure or vacuum. Required for most tanks to be covered by Warranty.
1. Name:SS304/SS316L Pressure Relief Valve
2. Size: from 1/4" to 8" or according to your size.
3. Standards: DIN,3A,SMS,ISO.
4. Material: ,AISI304,AISI316L,
5. Finish: Mirror polish, Semi bright
6. Connection: Welded, Clamped
7. Packaging: Shrink packed – carton -plywood case
8. Sample: Sample and freight cost can be negotiable
9. Applications: Extractor products parts,Pharmacy, beer, food, dairy, brewing, beverage, water treatment and chemical industry
Sanitary Solutions Tank Pressure Vacuum Relief Valves work in the following ways-- From the Vacuum side, when the valve is normally closed and there is vacuum in the tank, the vacuum piston inside the valve opens automatically and draws air into the tank. In return, this keeps the pressure inside and outside the tank balanced. From the Pressure side, when the valve is normally closed and the tank pressure exceeds the rated pressure on the outside of the valve, the valve automatically opens and vents air to atmosphere.
As for installation of the clamp style Tank Pressure Vacuum Relief Valve, position the valve on the process line and tighten the nut or fasten the clamp according to the fastening system selected and if you are using the clamp style it is recommended to use a clamp gasket and tighten the wing nut of the Heavy Duty Single Pin Clamp to 25 inch pounds of torque.
Note: Since this valve has been set at 15 psi (pressure), any pressure exceeding 15 psi, this valve will open and expel to atmosphere, thus protecting the tank from over pressurizing.
|Sanitary ss304 and 316L pressure relief|
|Size||3/8" to 4"||DN 10 to DN 100|
|Pressure||0 to 3 bars|
|Application||This series exhuast valve is the sanitary stainless steel valve, It's safety sesign make it prtect the equipment, So it installed in the returen circuit of discharge pressure, It's good for safety protect function in pipeline, Pump, device, storage tank. Extensiveloy use to food, beverage, dairy, Beer industry etc.|
|Working Principle||This series exhuast valve is calibration one specific pressure by adjust gland nut, calibration pressure is the max. Safety pressure in order to avoid equipment damage. Under the normal working pressure, the valve is close. When the pressure of system beyong the calibration pressure, the exhuast valve will be open. The pressure in the pipeline system get release, thus protect the pipeline and equipment.|
Contact Person: Cindy Chen
Tel: 0086-137 9040 7437