300L SS304 / 316 Conical Beer Fermenter Equipment Of Making Craft Beer

Design pressure:45psi(3bar);working pressure 15psi(1bar);

Interior and exterior finish bright polish 0.6-0.8 hygiene sueface ;

4 304 stainless steel legs with leveling footpads;

60° degree cone bottom. other angles can be specified during the design process;

combine drain exrensions and beer port in cone are standard;

20% headspace, unless a differient volume is required;

Top many wanway or side manway door;

Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet;

Polyurethane insulation thickness 80mm for cooling jacket on side and bottom;

Fully welded exterior shell;

Non welding CIP arm and rotating 360 degree reach spray ball;

Solenoid relief valve, pressure relief valve (safe valve) are standard;

Pressure guage;

Temperature sensor shell;

Sanitary sample vale and port;

All clamps and gaskets to attach all accessories;

Tank complete with pipingm fittings, sanitar valves and all parts;

Carbonation port is available for special request (stone not included);

Ladder hooks is available for special request;

Dry hop pots and hop bag hooks in any fermenter of any size for special request;